Bricolaje
Concreto
Adhesivos

DIY Concrete Nameplate

Publicado por Sika Expert
enero 25, 2021
Time: 1 Hour
Skill Level: Beginner
Estimated Cost: $45

DIY Concrete Nameplate Project

These nameplates were quick and easy to make using SikaQuick Patch and SikaBond Construction Adhesive.

Supplies & Tools

  • Miter Saw
  • Plastic Cups/Craft Sticks
  • Silicone Letter Mold
  • Caulk Gun
  • Plastic Tubs
  • Sand Paper
  • Stain/Paint
  • SikaQuick Patch (1)
  • SikaBond Construction Adhesive (1)
  • Small Wooden Base
  • *These supplies will yield at least 10-12 nameplates.

Step 1: Separate SikaQuick Patch Components

Using a pair of scissors, cut a corner of the "B" component large enough to pour the entire contents into a plastic tub. Next, cut a corner of the liquid component "A" and pour it into a separate plastic tub. 

SikaQuick Patch
SikaQuick Patch
Tip: Mix in small cups for more manageable batches.

Step 2: Mixing

Mixing the 2 components in smaller cups makes it easier to pour into the small letter molds.

SikaQuick Patch
SikaQuick Patch

Step 3: Sanding

The letters cured overnight and easily popped out of the silicone mold in 24 hours. Make sure to sand each letter for a smooth finish, wash, and let air dry. 

SikaQuick Patch
SikaQuick Patch
Note: The silicone really slows down the curing process.

Step 4: Bonding

With a caulk gun dispense SikaBond Construction Adhesive onto a plate. Using craft sticks apply a small amount of construction adhesive to the bottom of each letter. Place them on the wooden base. 

SikaBond Construction Adhesive
SikaBond Construction Adhesive

Complete: DIY Concrete Nameplate Project

DIY Concrete Nameplate Project