Can a second layer of Sikaflex+ Self Leveling Sealant be applied over a current one?
Sikaflex+ Self Leveling Sealant and all of Sika's polyurethane sealants will bond to themselves. The surface of the sealant must be clean. Please allow the product to cure for 3 to 5 days. It will cure to a flexible and elastic consistency. After, you can wipe the surface with water and a clean rag to remove any debris on the sealant. Once the sealant is dry, reapply the second layer. If the sealant is more than a month old, a solvent wipe with a rag is recommended. Xylene or Acetone can be used, allow the solvent to fully flash off. You do not want to trap any solvent between the layers of sealant.
Did this content answer your question?