What works best for cleaning your tools after using Sikacryl PowerSet Gap Filler?

Eye protection and gloves must be worn at all times during clean up. If Sikacryl PowerSet Gap Filler is still soft, Xylene or MEK can be used but be careful since these are solvents. If Sikacryl PowerSet Gap Filler is hard, then mechanical preparation is needed. This can be a grinder or a chisel and hammer for example. This product has a fast reaction time so it will not stay unreacted for very long. In 68F - 77F, it will gel in 4 minutes and it will be fully cured in 40 minutes.