Do It Yourself

DIY Paw Print Keepsake using SikaQuick® Patch

Posted by Sika Expert
April 5, 2020
Time: 1 Hour
Skill Level: Beginner
Estimated Cost: $25

Quick and easy project for your pet using SikaQuick® Patch

PRO Select Products Used

Supplies & Tools

  • SikaQuick® Patch (1 Bag)
  • Mold (Paw Print)
  • Sand Paper (fine)
  • Paint Markers
  • Letter Stencils

SikaQuick-Patch-Pet-Pawject-Mold-2
Supplies

Project Instructions

Begin the project by mixing SikaQuick Patch right in the bag.

  • Roll Part A (like a tube of toothpaste) toward the middle burst seal.
  • Once you rupture the seal, mix contents for at least 20 seconds.
  • Be sure to check each corner of the bag ensuring the contents are fully mixed.
  • Next, pour mixed material into the mold.

Let set for at least 60 minutes.

Removing Mold

Once fully cured, you may now remove solid mold and sand for a smooth finish. Next, paint the mold (paint markers are recommended). Once the paint has dried, add your pet's name using the letter stencils.

Project Complete!

SikaQuick-Patch-DIY-Project