DIY Concrete Nameplate Project
These nameplates were quick and easy to make using SikaQuick Patch and SikaBond Construction Adhesive.
Supplies & Tools
- Miter Saw
- Plastic Cups/Craft Sticks
- Silicone Letter Mold
- Caulk Gun
- Plastic Tubs
- Sand Paper
- SikaQuick Patch (1)
- SikaBond Construction Adhesive (1)
- Small Wooden Base
- *These supplies will yield at least 10-12 nameplates.
Step 1: Separate SikaQuick Patch Components
Using a pair of scissors, cut a corner of the "B" component large enough to pour the entire contents into a plastic tub. Next, cut a corner of the liquid component "A" and pour it into a separate plastic tub.
Step 2: Mixing
Mixing the 2 components in smaller cups makes it easier to pour into the small letter molds.
Step 3: Sanding
The letters cured overnight and easily popped out of the silicone mold in 24 hours. Make sure to sand each letter for a smooth finish, wash, and let air dry.
Step 4: Bonding
With a caulk gun dispense SikaBond Construction Adhesive onto a plate. Using craft sticks apply a small amount of construction adhesive to the bottom of each letter. Place them on the wooden base.