How to upgrade your house numbers using SikaQuick® Patch
Supplies & Tools
- Number Molds
- 10 oz. Caulk Gun
- Safety Gloves
- 10 oz. Cartridge SikaBond Construction Adhesive (1)
- SikaQuick® Patch (2)
- Acrylic Craft Paint (optional)
Step 1: Roll & Mix
Roll SikaQuick® Patch until middle seal breaks. Mix thoroughly by shaking the pouch back-and-forth for 20 seconds or until all clumps are gone.
Step 2: Cut & Pour
Cut the pouch at a corner with a pair of scissors and pour contents into the number molds.
Step 3: Curing
Allow molds to cure for at least 30 minutes to 1 hour (depending on depth).
Step 4: Applying Adhesive
Once concrete molds are fully cured, simply pop them out and apply SikaBond Construction Adhesive to the back. Adhere to the desired location and press firmly until the molds stay in place.